Terrashield Fine product pot

Terrashield Fine

By JPL Innovations Pvt. Ltd.

Elastomeric • Fire-retardant • Hydrophobic

Terrashield Fine is a high-performance plaster that ensures superior strength, fire-retardant properties, eco-friendliness, and water resistance. It is directly paintable — saving time and cost by eliminating putty and primer requirements.

Cost & time effective
No putty, priming & sanding required
Ready to use
No site mixing, minimal material wastage
Anti fungal
Prevents surface deterioration in damp conditions
Elastomeric & Flexible
Absorbs micro movements in substrates without cracking
Buy Now
Call to place your order

Product Overview

Ideal for Mivan, Pre-cast, Gypsum, RCC, AAC blocks, and drywall surfaces. Terrashield Fine delivers a seamless, hydrophobic surface that performs under harsh conditions while improving the overall finish for subsequent paint systems.

Surface is paint-ready within 96 hours after the second coat under normal drying conditions.

Terrashield Fine application on wall

Technical Advantages

Elastomeric, sustainable, and paint-ready plaster engineered for long-lasting, safer surfaces.

Crack-Resistant
Ideal for surfaces prone to thermal or structural stress.
Elastomeric & Flexible
Absorbs micro-movements in substrates without cracking.
Fire Retardant
Reduces flame spread and smoke generation for enhanced safety.
Cost & Time Efficient
No putty, priming, or sanding required.
Eco-Friendly
Supports IGBC, GRIHA & LEED certifications.
Ready-to-Use
No mixing required; minimal material waste.
No Curing
Hardens without water spraying or covering.
Paintable Properties
Smooth surface ready for premium emulsions and textures.
Anti-Fungal
Prevents surface deterioration in damp conditions.

Application Procedure

Download Terrashield Fine TDS

Prior Check

  • Ensure substrate is free from dust, chalking, grease, algae, fungus, and loose particles.
  • Check substrate integrity — it should not be debonded and must be completely dry.

Steps

  1. Apply Terrashield Fine with a roller or trowel in 2 coats (max combined thickness 2mm recommended per coat).
  2. Allow the first coat to dry for 6–8 hours before applying the second coat.
  3. Remove excess material vertically and horizontally for a smooth finish; use 45 GSM nylon mesh for joints if needed.
  4. Surface is paint-ready within 96 hours after the second coat.

Special Notes

For AAC blocks, drywall joints, and mivan joints, embed 45 GSM nylon mesh between coats. For interiors, use Premium Emulsion and for exteriors, use Anti-Fungal Emulsion.

Coverage

Description Max Thickness Coverage (sq.ft.)
Coarse Cement Plastered2.0 mm80 – 100
Fine Sand Plastered2.0 mm100 – 120
Gypsum Plastered2.0 mm150 – 175
RCC Ceiling (no mesh)2.0 mm140 – 175
RCC Wall2.0 mm140 – 175

Note: Coverage may vary depending on cracks and substrate condition.

←